Pattern Studio | Pricivo

P / 01

Not just a pretty outline.

Select a block, enter real measurements and review the construction. Your cutting pieces will appear here.

Example only. You still review and generate the draft.

Print it at its real size.

PDF includes calibration, overlap and assembly notes. SVG preserves the millimetre geometry.

Make it yours

Dedicated pattern block

Shaped front and back on the fold with curved armholes, a set-in sleeve whose cap is solved to the armhole length plus ease, matched notches and a rib neckband.

Fabric requirementKnit jersey with 20-50% crosswise stretch and good recovery, plus rib for the neckband.

Actual fabric behavior

Use the fabric you will actually sew. Research can suggest a material class, but Pricivo will not infer stretch, recovery or drape from fiber percentages.

Shell constructionI checked the actual fabric and confirm this construction.Fabric weight (GSM, optional)GSMHand / drapeMeasured wash shrinkage (optional)%

Display units

Finished dimensionsFinished body lengthcmHigh shoulder point to finished hem. Range 45-95 cm. Pre-filled with the block default, not your measurement.Sleeve lengthcmCap top to finished hem. About 200 short, 600 long. Range 14-75 cm. Pre-filled with the block default, not your measurement.Sleeve tapercmSleeve hem = sleeve biceps width minus this. Short sleeves 20-40, long sleeves 120-200. Range 0-30 cm. Pre-filled with the block default, not your measurement.Front neck depthcmHigh shoulder level to centre-front neckline. Range 4-16 cm. Pre-filled with the block default, not your measurement.Back neck depthcmHigh shoulder level to centre-back neckline. Range 1-5 cm. Pre-filled with the block default, not your measurement.Finished neckband widthcmFolded band after stitching. Range 1-3.5 cm. Pre-filled with the block default, not your measurement.

Construction controlsChest easecmAdded to the full chest. 0-60 fitted, 60-120 regular. Negative needs stretch. Range -4-25 cm. Pre-filled with the block default, not your measurement.Waist easecmAdded to the full waist; shaping never goes more than 30 mm in from the chest per quarter. Range -2-30 cm. Pre-filled with the block default, not your measurement.Hip easecmAdded to the full hip at the hem. Range 0-30 cm. Pre-filled with the block default, not your measurement.Neckline easecmWidens the opening beyond the base of the neck. Crew-neck tees about 100-150. Range 0-22 cm. Pre-filled with the block default, not your measurement.Armhole easecmDeepens the armhole. Higher = more movement, less fitted. Range 0-6 cm. Pre-filled with the block default, not your measurement.Shoulder slopedegreesAngle of the shoulder seam. Square shoulders about 15, sloping about 22. Range 10-28 degrees. Pre-filled with the block default, not your measurement.Biceps easecmAdded to the upper-arm circumference. Range 0-15 cm. Pre-filled with the block default, not your measurement.Sleeve cap easecmExtra cap length eased into the armhole. Knits 0-10 mm. Range 0-3 cm. Pre-filled with the block default, not your measurement.Neckband length ratioratioBand length / neckline length. Confirm on your rib. Range 0.72-1 ratio. Pre-filled with the block default, not your measurement.Measured usable rib stretch requiredratioA 100 mm sample comfortably reaching 140 mm = 0.40. Range 0.05-1.2 ratio.

Base seam allowance (mm)Fold edges stay at zero. Native hems, casings and necklines use the construction-specific allowances printed in the notes.

What this block does not promise

Knits only; not a woven shirt block.

No darts, so very full busts may need a bust adjustment.

No hood, pockets, collar or grading yet.

Experimental until sewn and fitted.

I reviewed the dimensions, fabric requirements and visible details. I accept this block's stated limits and will make a test garment.

Enter Chest / bust circumference, Waist circumference, Hip circumference and 6 more before drafting.

Keep the work.

ON THIS DEVICEPortable project file

Download the current design inputs and measurements as JSON. The reference photograph is never included.

Import project JSON

Want this project on another device? Sign in to save cloud projects and reusable measurement profiles. Local JSON stays available without an account.

Make the idea makeable.

Describe anything you want to sew.

Not just a pretty outline.

Print it at its real size.

Make the idea makeable.

Describe anything you want to sew.

Fitted tee, set-in sleeve

Not just a pretty outline.

Print it at its real size.